The ADM series AirData Multimeters may be used as hand-held portable meters for air velocity, pressure and temperature measurement. These meters may also be used to obtain direct air flow readings with an 8400 FlowHood kit. Any model meter can be upgraded to a model with greater capabilities whenever needed.
The Models ADM-880C, ADM-870C, and ADM-860C offer memory to store readings (2000, 200, and 100 readings, respectively), and an RS232 communication port for serial output of the stored readings to a printer or computer. The ADM-880C offers special features for datalogging and troubleshooting applications. The Model ADM-850L is a simplified version of the AirData Multimeter. Please note that any of the ADM series AirData Multimeter kits may be purchased with or without the 8400 FlowHood kit.
The FlowHood CFM-88L is used for air flow, temperature and absolute pressure measurement only, and comes complete with a CFM-88L meter, TemProbe and an air capture hood. The FlowHood Model CFM-850L has added functions for pitot tube air velocity, differential pressure, and temperature measurement.
FlowHood kits are available in a combination of top sizes. Custom top sizes will be designed to order upon request.
The ADM-850L Multimeter offers the unequaled accuracy and flexibility of the Shortridge Instruments AirData Multimeters, in a simplified model, and at a reduced cost.
Economical Precision Multimeter
This meter may be ordered as part of the ADM-850L Multimeter Kit, complete with accessories for measuring air velocity, pressure, and temperature, or as part of the CFM-850L FlowHood kit.
Electronic Micromanometer for Datalogging
The ADM-870C AirData Multimeter is designed specifically for applications with very demanding air distribution requirements and features an RS232 Communications Port which allows the user to download readings to a printer or computer.
Serial Output To Printer or Computer
Air quality control maintenance for hospitals, pharmaceutical, biological and medical research laboratories, semiconductor manufacturing clean rooms, and other applications in which the highest standards of the industry must be met.
Complete Air Balance System
The CFM-88L FlowHood includes the CFM-88L FlowMeter, the base metering section with 16 point velocity grid, various top sizes and rugged carrying case.
The FlowHood CFM-88L uses the electronic, digital AirData Flowmeter for direct readout at supply, return, or exhaust outlets, in cfm or liters/sec.
This rugged, shock resistant meter automatically selects the proper range and corrects for local barometric pressure and temperature.
These features eliminate several error factors and the calculations necessary to convert airflow readings to local density results.
Internal calibration and zeroing are fully automatic. No adjustments are ever needed.
The ADM-860C AirData Multimeters include an RS232 communication port, which allows serial output to a printer or computer.
Serial Output To Printer or Computer
Electronic Micromanometer for datalogging
The ADM-880C AirData Multimeter stores 2000 readings, along with the time and date, in up to 25 memory groups.
Each reading may be recalled along with the average, sum, minimum, maximum, and standard deviations of the readings for each mode within each group.
Serial Output To Printer or Computer, and Computer Spreadsheet Compatible
The VelGrid is a 12″ square, 16 point, face velocity grid for coil, filter, fume hood and cleanroom testing.
The VelGrid is an accessory especially designed for use in the measurement of general face velocity conditions such as exhaust hoods, HEPA cleanroom filter outlets, laminar flow work stations, and large filters and coils.
Each reading represents the input of 16 velocity points over a one square foot area.
A 54-inch adjustable extension handle and meter neckstrap allow convenient positioning and use of the VelGrid.
The VelGrid comes complete with pushbutton handle, extension rods, tubing harness and meter neck strap.